Frama-C-discuss mailing list archives
This page gathers the archives of the old Frama-C-discuss archives, that was hosted by Inria's gforge before its demise at the end of 2020. To search for mails newer than September 2020, please visit the page of the new mailing list on Renater.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Frama-c-discuss] Runtime problem on ARM
- Subject: [Frama-c-discuss] Runtime problem on ARM
- From: loganjerry at gmail.com (Jerry James)
- Date: Fri, 9 Aug 2013 15:30:01 -0600
- In-reply-to: <CAHCOHQk53r8ovem44mmukbQ3kcg+5AS153eLBiM0ZcS8mYaxAQ@mail.gmail.com>
- References: <CAHCOHQ=2x1iXmzrWYS=RRMzGkDrUSAYeqLH2=q-qe0AokVGksw@mail.gmail.com> <CAOH62JjSuaONTN+CsEnyPKn-COvz6NXskY9kFLih_uCUUkU0sQ@mail.gmail.com> <CAHCOHQk53r8ovem44mmukbQ3kcg+5AS153eLBiM0ZcS8mYaxAQ@mail.gmail.com>
On Fri, Aug 9, 2013 at 1:59 PM, Jerry James <loganjerry at gmail.com> wrote: > Wow, what a fast response! Thank you very much for the patch. I will > do a build with it and report back on the results. Regards, Initial testing looks good. Frama-C on ARM correctly runs some simple examples, anyway, which is much better than failing to start at all. Thanks again for the patch, Pascal. -- Jerry James http://www.jamezone.org/
- References:
- [Frama-c-discuss] Runtime problem on ARM
- From: loganjerry at gmail.com (Jerry James)
- [Frama-c-discuss] Runtime problem on ARM
- From: pascal.cuoq at gmail.com (Pascal Cuoq)
- [Frama-c-discuss] Runtime problem on ARM
- From: loganjerry at gmail.com (Jerry James)
- [Frama-c-discuss] Runtime problem on ARM
- Prev by Date: [Frama-c-discuss] Runtime problem on ARM
- Next by Date: [Frama-c-discuss] Value Analysis
- Previous by thread: [Frama-c-discuss] Runtime problem on ARM
- Next by thread: [Frama-c-discuss] Value Analysis
- Index(es):